Stillroom Technology
Intro to Helm
Helm can be a simple single-object panner for Nuendo or an extremely deep Dolby Atmos object playground.
I suggest that you start in Pre-Viz mode, meaning nothing is being sent out, but everything can be saved and recalled when you want to connect to Nuendo.
Spend some time with it. It was designed to be used like how lighting systems are programmed. You can do all the pre-visualization and then hook it up to Nuendo and either manually play back the scenes, sync to timecode, or have Nuendo sync to Helm’s timecode. or just used live into Nuendo
First moves
In the Cube. Touch to move -Pinch to Zoom and two finger drag on the cube, then hit the return to center button on the bottom right of the cube
`touch anywhere in the bottom left square to drag object around the right square will give you vertical movement.
Both of the same time will get you anywhere in the cube you want to be
Tap the draw button and move the object you’ll see the path follow behind it. Tap draw when you’re done.
You can then use the puck in the upper left hand corner or the along slider under the draw button to playback the path forward back stop however you want
Press the play button to automatically play. there is a pre-roll button marked pre-on the top line start with that off.

Helm PS DualSense Control
Pair with iPad touch Helm and hit a button
• Left stick + L2: L/R and B/F
• Right stick + R2: height
• Release either stick: object freezes (stays parked)
• L3: park floor / click to center
• R3: park height
• Cross: Play (or drop a point in Free/Path)
• Circle: Stop (hold for 00:00:00:00)
• Square: toggle Draw (hold cycles Free / Path / Link)
• Triangle: clear path
• L1 / R1: change object
• D-pad: arm G1–G4 (hold for matching bed)

Adding an object to a group
Tap on the object number. Then press the group 1 button under the object list, then on the left-hand side press the group 1 button.
Four different paths can show in the cube at the same time, but unlimited objects can be in a group. You just have to pick the four that are visible, but all will send out their path information on play.
The checkmark will display the path in the window. Go ahead and hit the cycle button, then hit play.
The left-hand slider will change the speed. The right-hand slider will delay from start. The return arrow at the will start play from the end.
Tap on an object in the group window and it will add a quantize value to the path. The object will move to the new path mark on the path, triggering it. It will flash and tap through the values. They’re 1/2, 1/4, 1/6, and 1/8. One more tap will take you to the original path, double tap to return to the main screen.

Additional Drawing Techniques
PATH
Start with one object and draw a path. Copy that path, select another object, and hit Paste.
Press and hold the Draw button until a new menu pops up. Select Path, then use the Along slider to move through the path. Tap on the part of the path in the cube where you want to add a dot. You can move and zoom in or out of the cube to get a better look at the path line. Repeat as many times as you want—you can go forward and backward. The dots will fire along the path.
You can pick a different color, assign both objects to a group, press the Group button, and hit Play.
FREE
Select a new object and use the lower squares to move it to the starting point. Tap it in the cube window, move it to your next position, tap again, and repeat as many times as you want. Then assign it to a group, open the group, and hit Play.
You can filter objects by whether they have been moved off center or have a path drawn by pressing the Path button above the object selection grid. This shows only objects that have paths or have been moved off center. Color shows the objects organized by color. All shows everything.

Object beds attached to a path
Start with an object and draw a path, then assign it to a group.
We’ll start with two objects, but you can have as many as you want. Assign each object to the same bed. Move the objects, keeping in mind that they will be connected. Then tap on the object path that you want to lock them to.
Long press on Draw to bring up the menu, then press and hold the Path button. You will see the beds under the group buttons glowing. Tap the bed associated with the objects you created.
There is a size slider, speed slider, and loop control.
Now activate the group button associated with the path and hit Play. The two objects will be locked together and follow that path. They don’t have to spin.
The path they are locked to can use all the functions in that card, including speed and delay. If the group card is set to loop, the bed objects will follow. If the group objects’ path is not set to loop, the bed objects will park at the end of the path. If Spin is activated, they will continue to spin until you press Stop.

Object beds and proximity-based automation
Object beds in Helm are my way of creating two or more objects linked together. Dolby Atmos objects are not really stereo objects. Two objects can be connected to create a stereo pair, but they are still individual objects to the renderer.
When objects are linked together in object bed mode, they can be moved around as a group and resized.
Any object bed group with four or more objects will be used as a boundary. For example, eight objects can form a box and be assigned to an object bed. Any object passing through that boundary box carries MIDI channel 1 and a CC number matching the object. That CC value starts at zero. As the object passes through the boundary box, or anywhere inside it, the CC value increases or decreases depending on where the object is relative to the corners and center of the box. When it exits the boundary, the CC value returns to zero.
You then set up an effect channel in Nuendo. It can be a standard effect routed to the Atmos bed and renderer, or an object effect bed. On the object channel, MIDI-learn the send fader. You then have proximity automation on a slow S-curve moving through the boundary. Nothing else needs to be done; it is automatic.
Do not use Send Eight. It is already assigned to the object under the hood.
For example, you can create a reverb that will theoretically be held within the box. The box is a proximity trigger; it does not hold the actual reverb. It controls the CC value on the object passing through or inside it. Multiple objects can use the same box space.
The same CC value on one object can affect multiple effect channels, such as a reverb and a delay. Multiple objects can pass through the box with different send levels going to different effects. Each of the 108 objects is assigned to MIDI channel 1 and a CC number matching the object. MIDI-learning a send level on the channel for the object is just one way to use it. You can treat movement into and out of the boundary as a way to control anything that responds to a CC value.
Proximity-based automation
One example is to create a boundary with four or more objects, create an effect channel in Nuendo, and MIDI-learn the effect send for the object you want to pass through the boundary to that object's CC.
With a multichannel reverb in an effect bed or object effect bed, you can resize the return space to mimic the boundary in the room. That way, the object moving through the space places the reverb in the room around the boundary.
Another example is a horizontal box plane in the middle of the room. Assign an effect triggered while an object passes through it, such as a reverb and an underwater effect. An object can pass through the plane, trigger the reverb, then reverse the send for the underwater sound, creating unusual spatial effects without manual automation.
These are two simple concepts that are easy to accomplish. They open up creative possibilities beyond manually
automating every effect.
Keep in mind that spatial techniques like this are still very early. Even though the math is correct for the space, realistic expectations for holding a reverb within a confined space are not 100% perfect. The CC add positional information is accurate. As technology and speaker arrays continue to grow, the physics and math used here will stay the same and only improve.




Why This Architecture Is So Powerful in Atmos
True Architectural Slapback & Early Reflections: When an object enters a boundary box on the front-left of the room, that single CC curve can drive a tight early-reflection Object Bed right at the boundary and simultaneously feed a long delay Object Bed parked on the rear-right wall—simulating real acoustic slapback across a massive space.
Independent Depth Per Object: Because each object carries its own CC number and proximity S-curve, two objects flying through the same boundary box at different distances from its core automatically send different ratios to your effect Object Beds—creating genuine depth-of-field without manual fader rides.
Decoupled Spatial Choreography: Placing reverb, delay, and granular Object Beds in completely different pockets of your 9.1.6 room means the dry sound and its processed tails never clutter the same physical speakers, keeping the mix transparent even when multiple objects trigger effects at once.
Saving and loading object beds
Object beds can be saved, loaded or cleared by long press on the bed, selector one through four.
To save a bed, long press on the associated bed, press save, and name the preset.
To load a bed, you need to have the same amount of objects assigned to a bed. They don’t have to be moved in the cube. They just need to be addressed and assigned to a bed number.
Then hit load bed, pick the preset you want, and then when you press bed again, it will show up in the cube.
To clear a bed, long press on the bed and hit clear. It’s as easy as that.

A few things to add before we get into time code cues, video, etc.
You can change the layout of the screen from left to right by clicking on the top.
Also, the sliders on the left-hand side create a separate boundary that the object cannot move out of. This is not like the object bed boundary. This is just a constrained space that the object will not be able to move out of, to make panning easier and keep it in a certain area.
